| Specification |
Type: Fire Alarm Host;
Function: Networked, RS485 or RS232;
Usage: Fire Alarm Control;
Alarm Volume (within 1m): ≥80dB;
Networking Mode: Can Bus;
Receive Frequency: Addressable Fire Alarm;
Wiring Mode: Non-Polarity 2 Wired;
Applications: Building, Factory,Hotel, Housing;
Capacity: Maximum 508;
Installation: Wall Mounted;
Loops: Maximum 2 Loops;
|
Type: Fire Alarm Host;
Function: Linkage;
Usage: Auto, Fire, Smoke;
Networking Mode: Linkage;
Wiring Mode: Bus System;
No. of Loop: 1, 2, 4, 6 Loop;
Protection: 4kv Surge Protection(Built-in);
display: 7'' TFT Touch Screen;
Material: Flat Sheet Metal;
Color: with Outer Glass Door;
Weight: 16.70kg;
Humidity: 0 to 95% Relative Humidity, Non Condensing;
|
Type: Fire Alarm Host;
Function: Networked;
Usage: Fire, Smoke;
Alarm Volume (within 1m): ≥100dB;
Networking Mode: Alarm;
Receive Frequency: 485/232;
Wiring Mode: Sub-Line System;
Weight: 7kg;
Color: Red;
Number of Zones: 4;
Primary AC: 90-270VAC 50/60Hz;
Standby Battery: 2*12V;
Power Supply Rating: 3 AMPS @24VDC;
Alarm&Fault Relay Rating: 2A & 30VAC , Resistive;
Normal Initiating Operating Voltage: 23VDC, Maximum 26VDC, Regulated;
Maximum Number of Detectors: 30;
Sounder Voltage(VDC): 27;
Maximum Sound Current Per Zone: 500mA;
Max. Sounder Sounder Number of Per Zone: 5;
Alarm Zone End of Line(Ohms): 10K;
Max. Auxiliary Supply Current (Ma): 500mA;
|
Type: Fire Alarm Host;
Function: Networked;
Usage: Fire, Smoke;
Alarm Volume (within 1m): ≥100dB;
Networking Mode: Alarm;
Wiring Mode: Sub-Line System;
Weight: 2.7kg;
Number of Zones: 2;
Primary AC: 90-270VDC;
Standby Battery: DC 12V/2.2ah * 2 (Not Include);
|
Type: Fire Alarm Host;
Function: Networked;
Usage: Auto, Fire, Smoke;
Alarm Volume (within 1m): ≥100dB;
Networking Mode: Dial-up;
Receive Frequency: Wire;
Wiring Mode: Sub-Line System;
Main Supply: 90-270VAC, 50/60 Hz;
Number of System Zones: 4 Zone;
Panel Weight: 5kg;
Extinguishant Release Output: 21V-28VDC. Maximum Load 2 AMP;
Alarm Zone End of Line (Ohms): 10K;
Power Supply Rating: 3 AMPS Total Including Battery Charge 28V+/-2V;
Battery Type: Two 12 Volt Sealed Lead Acid in Series;
Battery Charge Voltage: 27.6VDC Nominal;
Battery Charge Current: 0.7A Maximum;
Maximum Current Draw From Battery: 3AMPS;
Fault Relay Contact Rating: 2A /30VDC Maximum for Each;
Fire Relay Contact Rating: 2A /30VDC Maximum for Each;
First Stage Contact Rating: 2A /30VDC Maximum for Each;
Second Stage Contact Rating: 2A /30VDC Maximum for Each;
Extract Contact Rating: 2A /30VDC Maximum for Each;
|
