| Specification |
Application: Aerospace Industry, Appliance Industry, Automotive Industry, Construction Industry, Electronics Industry, Furniture Industry;
Coating Type: Powder Coating;
Heating system: LPG;
Warranty: One Year;
Model: Santon2501;
Pressure: 0.7MPa;
|
Application: Appliance Industry;
Coating Type: Anti-corrosion Coating;
Heating system: Diesel, electric, gas, LPG;
Warranty: One-Year Warranty;
Furnace Temperature: 830-900℃ Optimal Range for Enamel Frit Melting;
Temperature Control Accuracy: ±2℃;
High-Temperature Zone: ≤±5℃ (at Any Point in The Furnace);
Degreasing Temperature: 50-60℃ (Processing Time 15-20min);
Pickling Temperature: 40-50℃ (for Rusty Workpieces);
Drying Temperature: 80-120℃ (Drying Time 10-40min);
Power Supply: 440/380V/50Hz, 220V/60Hz;
Workpiece Materials: Carbon Steel/ Stainless Steel;
Applicable Workpieces: Water Heater Tank;
Physical Pre-Treatment: Shot Blasting/ Manual;
Enamel Dry Film Thickness: 150-500μm;
Adhesion: ≥5n/Cm;
Salt Spray Resistance: ≥500 Hours;
Capacity: 80-300 Pieces / Hour (50L Tank);
Energy Consumption Per Unit Product: ≤8 Kw·H / Piece;
|
Application: Appliance Industry;
Coating Type: Anti-corrosion Coating;
Heating system: Diesel, electric, gas, LPG;
Warranty: One-Year Warranty;
Furnace Temperature: 830-900℃ Optimal Range for Enamel Frit Melting;
Temperature Control Accuracy: ±2℃;
High-Temperature Zone: ≤±5℃ (at Any Point in The Furnace);
Degreasing Temperature: 50-60℃ (Processing Time 15-20min);
Pickling Temperature: 40-50℃ (for Rusty Workpieces);
Drying Temperature: 80-120℃ (Drying Time 10-40min);
Power Supply: 440/380V/50Hz, 220V/60Hz;
Workpiece Materials: Carbon Steel/ Stainless Steel;
Applicable Workpieces: Water Heater Tank;
Physical Pre-Treatment: Shot Blasting/ Manual;
Enamel Dry Film Thickness: 150-500μm;
Adhesion: ≥5n/Cm;
Salt Spray Resistance: ≥500 Hours;
Capacity: 80-300 Pieces / Hour (50L Tank);
Energy Consumption Per Unit Product: ≤8 Kw·H / Piece;
|
Application: Appliance Industry;
Coating Type: Anti-corrosion Coating;
Heating system: Diesel, electric, gas, LPG;
Warranty: One-Year Warranty;
Furnace Temperature: 830-900℃ Optimal Range for Enamel Frit Melting;
Temperature Control Accuracy: ±2℃;
High-Temperature Zone: ≤±5℃ (at Any Point in The Furnace);
Degreasing Temperature: 50-60℃ (Processing Time 15-20min);
Pickling Temperature: 40-50℃ (for Rusty Workpieces);
Drying Temperature: 80-120℃ (Drying Time 10-40min);
Power Supply: 440/380V/50Hz, 220V/60Hz;
Workpiece Materials: Carbon Steel/ Stainless Steel;
Applicable Workpieces: Water Heater Tank;
Physical Pre-Treatment: Shot Blasting/ Manual;
Enamel Dry Film Thickness: 150-500μm;
Adhesion: ≥5n/Cm;
Salt Spray Resistance: ≥500 Hours;
Capacity: 80-300 Pieces / Hour (50L Tank);
Energy Consumption Per Unit Product: ≤8 Kw·H / Piece;
|
Application: Appliance Industry;
Coating Type: Anti-corrosion Coating;
Heating system: Diesel, electric, gas, LPG;
Warranty: One-Year Warranty;
Enamel Layer Thickness: 60-100μm (Flat Workpieces) 80-120μm (Cavity Workpi;
Firing Temperature: 820-900℃ (Optimal Range for Enamel Fusion);
Temperature Control Accuracy: ±2℃;
Temperature Uniformity Within The Furnac: ≤±5℃;
Firing Time: 3-6min (Adjusted Based on Workpiece Thickness);
Power Supply: 440V/380V/50Hz/60Hz Three-Phase AC (Customizable);
Certifications & Warranty: CE ISO9001 SGS;
Pre-Treatment Film Thickness: 4-6μm (Adhesion ≥5n/Cm);
Surface Moisture Content After Drying: ≤0.5%;
Energy Consumption Per Unit Product: ≤6.5 Kw·H / Piece;
Furnace Thermal Efficiency: ≥86% (Includes Waste Heat Recovery);
Categories: Oven Liners /Door Glass Frames/Grill Racks/Outer P;
Materials: Cold-Rolled Carbon Steel / Stainless Steel;
Oil Residue After Degreasing: ≤5 Milligram Per Square Meter;
Total Installed Power: 150-2000kw (Customizable);
|
