| Specification |
After-sales Service: Quality Problems Free Guidance and Maintenance;
Warranty: 12 Months;
Accuracy: >±1%;
Main Application: Nature Gas, Coal Gas, N2;
Size: DN15-DN1000;
Sensor: Plug-in;
Application: Industrial Production;
Type: Probe Type Flow Meter;
Measuring Media: Gas;
Measuring Principle: Thermodynamic;
Measurement Object: Closed Pipeline;
Output Type: Pluse, 4-20mA, RS485and GPRS, Hart;
Power Supply Type: 24VDC or 220VAC;
Connection Type: Flange, Plug-in, Thread, Tri-Clamp;
Body Material: 304ss, 316L;
|
After-sales Service: 1 Years;
Warranty: 1 Years;
Accuracy: ±0.6-1%;
Main Application: Diesel Fuel, Fuel Oil;
Size: DN100-500;
Sensor: Tube/Flange;
Application: Transportation;
Type: Vortex Flow Meter;
Measuring Media: Liquid;
Measuring Principle: Electrical Principles;
Measurement Object: Open Channel;
Model Type: Pireclb1e1t2;
Product Type: Point Infrared Combustible Gas Detector;
Detected Gases: Methane, Propane, Butane, Ethylene, etc.;
Detection Range: 0-100% Lower Flammable Limit (Lfl);
Output Signal: 4-20 Ma (Hart Protocol);
Communication Protocol: RS-485 (Modbus/Ascii);
Power Supply: 24 VDC (18-32 VDC);
Power Consumption: 4.0 W (Non-Relay Version), 5.5 W (Relay Version);
Operating Temperature Range: -55°C to +75°C;
Dimensions: Length: 9.3 in (23.62 Cm), Width: 5.2 in (13.21 Cm;
Protection Class: IP66;
|
After-sales Service: Online Service;
Warranty: 12 Months;
Accuracy: 0.1%~0.5%;
Main Application: Water, Wastewater, Diesel Fuel, Fuel Oil, Nature Gas, Corrosive Liquid/Gas;
Size: DN3 - DN200;
Sensor: Clamp-on/External;
Application: Energy Metering;
Type: Coriolis Mass Flow Meter;
Measuring Media: Gas & Liquid;
Measuring Principle: Coriolis;
Measurement Object: Open Channel;
Direct Mass Flow Measurement: Measures Mass Flow Directly, Independent of Fluid;
High Accuracy: Typical Accuracy: ±0.1% of Rate (Some Models up to;
Wide Applicability: Suitable for Liquids, Gases, Slurries, and Multiph;
Density Measurement: Provides Real-Time Density Measurement From The Fr;
Temperature Measurement: Built-in Sensors Measure Fluid Temperature.;
No Moving Parts: Minimal Wear, Zero Maintenance, Long Service Life.;
Bidirectional Measurement: Can Measure Flow in Both Directions;
Wide Rangeability (Turndown Ratio): High Turndown Ratio, Often 100:1.;
Insensitive to Fluid Properties: Works with Clean, Viscous, Non-Newtonian, or Even;
Pressure Drop: Typically Higher Than Some Other Flowmeters Due to;
Installation: Less Sensitive to Upstream/Downstream Straight Pip;
Output Signals: Provides Mass Flow, Density, Temperature, and Deri;
|
After-sales Service: Timely Online Instruction;
Warranty: 12 Months;
Accuracy: 1.0%, 0.5%;
Main Application: Water, Wastewater;
Size: DN10-DN1000;
Sensor: Tube/Flange;
Application: Industrial Production;
Type: Electromagnetic Flow Meter;
Measuring Media: Liquid;
Measuring Principle: Electrical Principles;
Measurement Object: Closed Pipeline;
Material: Cast Steel;
Measuring: Conductive Liquid;
Pressure: 1.6MPa;
Tempature: -20-80 ℃;
Power: 24VDC or 220VAC;
Protection Grade: IP65;
Output: Pulse/4-20mA/RS485;
Display: LCD Display;
Connection: Flange, Thread, Tri-Clamp;
Explosion-Proof: Ex dB Ia Iic T6 GB;
|
After-sales Service: Technical Support;
Warranty: 1;
Accuracy: >±1%;
Main Application: Nature Gas, Corrosive Liquid/Gas;
Size: DN100-500;
Sensor: Tube/Flange;
Application: Industrial Production;
Type: Thermal Mass Flow Meter;
Measuring Media: Gas;
Measuring Principle: Thermodynamic;
Measurement Object: Closed Pipeline;
Power Supply: DC24V or AC220V;
Working Pressure: Medium Pressure Less Than 4.0MPa;
Response Speed: 1s;
Pipe Material: Carbon Steel, Stainless Steel, Plastic, etc;
Output Signal: 4-20mA, Pulse, RS-485, Hart;
Ingress Protection: IP65;
|
