What is Double Shots Plastic Injection Mold and Electronic ABS Components
Price
Min. Order Reference FOB Price
1 Piece US$2,000.00-10,000.00 / Piece
Sepcifications
- Shaping Mode Injection Mould
- Surface Finish Process Polishing
- Mould Cavity Multi Cavity
- Plastic Material ABS
- Process Combination Type Single-Process Mode
- Application Car, Household Appliances, Furniture, Commodity, Electronic, Home Use, Hardware
- Runner Cold Runner
- Design Software Pro-E
- Installation Fixed
- Certification ISO
- Standard DME
- Customized Customized
- After-sales Service 24hrs Online Service
- Transport Package Wood Box and Wood Pallet
- Specification According to your drawing
- Trademark Custom
- Origin Guangdong, China
- Product Name Injection Plastic Mold
- Mould Life 300K-500K Shots
- Mould Material Nak80/P20/718h/738h/S136,etc
- Process Injection Molding
- Finish Pitting The Word, Mirror Finish, Matte Surface
- Package Wooden Case Package
- Hot Runner Moldmaster, Incoe, Yudo, Heitec, Gunther, etc
- Mold Type Insert Mold, Over Mold, Shuttle Mold
Product Description
Multi Cavity Shots Plastic Injection Mold and Electronic ABS Enclosure Product Description Product name Single cavity or Multi cavities injection mould supplier Mould Material ...
-
What Are Sink Marks in Plastic Injection Mold?By Dongguan Howe Precision Mold Co.,LTD on 11/09/2024Sink marks are some kinds of depression on the surface of the plastic part due to the shrinkage of the material underneath. Sink marks most commonly occur on a surface that has ribs, bosses, and other voluminous features on the rear side of the moulding. All plastics shrink as they freeze off, some more than others. One of the things you can do during the design phase is to identify where these injection molding sink marks are going to be and choose a material that doesn’t shrink as much. Or you can even add something to the plastic material like glass fibers or you can put talcum powder in and it will mitigate the shrinkage quite a bit. -
What Are Bubbles in Injection Molded Products?By Dongguan Howe Precision Mold Co.,LTD on 13/08/2024In injection molding, bubbles are not a common defect in general small workshops. Bubbles mainly occur in non-large transparent products; small transparent products are not prone to bubbles, while non-transparent products typically do not have specific requirements. Today, we will focus on bubbles in injection molding as we continue our exploration of molding defects. -
Understanding Shrinkage in Injection Molding PlasticsBy Dongguan Howe Precision Mold Co.,LTD on 08/07/2024It’s essential to understand what shrinking is, how it occurs in different injection molding plastics, and how it happens. Understanding these aspects can help you understand the process and its importance.