What is H13 Hot Runner Injection Mold for Thermosetting Plastic Part
Price
Min. Order Reference FOB Price
1 Set US$2,000.00-10,000.00 / Set
Sepcifications
- Shaping Mode Injection Mould
- Surface Finish Process Polishing
- Mould Cavity Single Cavity
- Plastic Material ABS
- Process Combination Type Single-Process Mode
- Application Car, Furniture, Electronic, Hardware
- Runner Hot Runner
- Design Software Pro-E
- Installation Fixed
- Certification ISO
- Standard DME
- Customized Customized
- Transport Package Wooden Cases/Air/Sea
- Specification Custom
- Trademark HOWE or Custom
- Origin China
- Name Helmet Injection Mold
- Process CNC Turning, Drilling, Milling, Punching.....
- Mold Cavity Single Cavity / Family Molds / Multi Cavity
- Mold Life Time 300, 000~1, 000, 000 Shots
- Sprue Gate Pin Point Gate, Edge Gate,etc
- Molding Material PC,PC/ABS,PC/PBT,etc
- Lead Time to T1 Sample 4~5 Weeks
- Lead-Time for Production 1~2 Weeks
Product Description
Custom Precision Injection mold for plastic part of Motorcycle Helmet with PC plastic material Product Description Mould type Plastic injection mould Mould material 45#, 50#, P20, 738, 738H, 718, 718H, NAK80, 2316, 2316A, S136 etc Product material ...
-
What Are Bubbles in Injection Molded Products?By Dongguan Howe Precision Mold Co.,LTD on 13/08/2024In injection molding, bubbles are not a common defect in general small workshops. Bubbles mainly occur in non-large transparent products; small transparent products are not prone to bubbles, while non-transparent products typically do not have specific requirements. Today, we will focus on bubbles in injection molding as we continue our exploration of molding defects. -
What Are Sink Marks in Plastic Injection Mold?By Dongguan Howe Precision Mold Co.,LTD on 11/09/2024Sink marks are some kinds of depression on the surface of the plastic part due to the shrinkage of the material underneath. Sink marks most commonly occur on a surface that has ribs, bosses, and other voluminous features on the rear side of the moulding. All plastics shrink as they freeze off, some more than others. One of the things you can do during the design phase is to identify where these injection molding sink marks are going to be and choose a material that doesn’t shrink as much. Or you can even add something to the plastic material like glass fibers or you can put talcum powder in and it will mitigate the shrinkage quite a bit. -
What Is Die Casting VS Casting?By Meco Inc. on 13/08/2024Casting is a vital manufacturing process for creating complex shapes. Die casting, in particular, offers precision, efficiency, and high-quality parts, widely used in automotive, aerospace, and electronics. Technological advancements and sustainability initiatives are enhancing its capabilities and environmental impact.