| Specification |
Application: Hardware Spraying Equipment;
Coating Type: Powder Coating;
Warranty: 2 Years;
Design: Compact and Ecomonical;
Material: Steel;
Powder Coating Booth: PP/PVC;
Reciprocator: Design Matched;
Power Recovery Unite: Filter Type/Cyclone;
Powder Recovery Rate: 98%;
Powder Recovery Time: 10-15 Mins;
Curing Oven: Natural Gas/Liquefied Gas/Electricity/Diesel;
Oven Temperature: Consistent and Stable;
After-Sales Service Provided: Engineers Available to Service Machinery Overseas;
Type: Electrostatic Spraying Equipment;
Coating: Powder;
Condition: New;
After-Sales Service: Field Maintenance and Repair Service;
|
Application: Aerospace Industry, Appliance Industry, Automotive Industry, Construction Industry, Electronics Industry, Furniture Industry;
Coating Type: Anti-corrosion Coating;
Heating system: Diesel, electric, gas, LPG;
Warranty: One-Year Warranty;
Firing Temperature Range: 800-950°C (Optimal Melting Range for Enamel);
Temperature Control Accuracy: ±2°C;
Furnace Temperature Uniformity: ≤±5°C (at Any Measurement Point);
Applicable Workpieces Categories: Cylindrical /Flat/ Irregularly Shaped Workpieces;
Applicable Workpieces Materials: Carbon Steel,/Cast Iron/Stainless Steel/ and Other;
Thermal Efficiency of Gas-Fired Models: ≥85% (Including Waste Heat Recovery);
Thermal Efficiency of Electric Models: ≥90%;
Heating Rate: 10-20°C/Min(Adjustable as Needed);
Enamel Layer Adhesion: ≥5 N/Cm;
Production Capacity for Continuous Mode: 1-5.0 M/Min (Conveyor Speed);
Production Capacity for Intermittent: 1-2 Batches Per Hour (Each Batch 50-100 Units);
Gas Consumption Per Unit: Gas-Fired Models ≤1.2m³ Per Unit;
Gas Consumption Per Unit2: Electric Heating Models≤6kw·H Electricity Consumpt;
Power Supply: 440/380V/50Hz, 220V/60Hz (Customizable);
Certifications: CE, ISO9001, SGS, EU Ecodesign;
|
Application: Appliance Industry;
Coating Type: Anti-corrosion Coating;
Heating system: Diesel, electric, gas, LPG;
Warranty: One-Year Warranty;
Firing Temperature Range: 800-950°C (Optimal Melting Range for Enamel);
Temperature Control Accuracy: ±2°C;
Furnace Temperature Uniformity: ≤±5°C (at Any Measurement Point);
Applicable Workpieces Categories: Cylindrical /Flat/ Irregularly Shaped Workpieces;
Applicable Workpieces Materials: Carbon Steel,/Cast Iron/Stainless Steel/ and Other;
Thermal Efficiency of Gas-Fired Models: ≥85% (Including Waste Heat Recovery);
Thermal Efficiency of Electric Models: ≥90%;
Heating Rate: 10-20°C/Min(Adjustable as Needed);
Enamel Layer Adhesion: ≥5 N/Cm;
Production Capacity for Continuous Mode: 1-5.0 M/Min (Conveyor Speed);
Production Capacity for Intermittent: 1-2 Batches Per Hour (Each Batch 50-100 Units);
Gas Consumption Per Unit: Gas-Fired Models ≤1.2m³ Per Unit;
Gas Consumption Per Unit2: Electric Heating Models≤6kw·H Electricity Consumpt;
Power Supply: 440/380V/50Hz, 220V/60Hz (Customizable);
Certifications: CE, ISO9001, SGS, EU Ecodesign;
|
Application: Aerospace Industry, Appliance Industry, Automotive Industry, Construction Industry, Electronics Industry, Furniture Industry;
Coating Type: Anti-corrosion Coating;
Heating system: Diesel, electric, gas, LPG;
Warranty: One-Year Warranty;
Furnace Temperature: 830-900℃ Optimal Range for Enamel Frit Melting;
Temperature Control Accuracy: ±2℃;
High-Temperature Zone: ≤±5℃ (at Any Point in The Furnace);
Degreasing Temperature: 50-60℃ (Processing Time 15-20min);
Pickling Temperature: 40-50℃ (for Rusty Workpieces);
Drying Temperature: 80-120℃ (Drying Time 10-40min);
Power Supply: 440/380V/50Hz, 220V/60Hz;
Workpiece Materials: Carbon Steel/ Stainless Steel;
Applicable Workpieces: Water Heater Tank;
Physical Pre-Treatment: Shot Blasting/ Manual;
Enamel Dry Film Thickness: 150-500μm;
Adhesion: ≥5n/Cm;
Salt Spray Resistance: ≥500 Hours;
Capacity: 80-300 Pieces / Hour (50L Tank);
Energy Consumption Per Unit Product: ≤8 Kw·H / Piece;
|
Application: Appliance Industry;
Coating Type: Anti-corrosion Coating;
Heating system: Diesel, electric, gas, LPG;
Warranty: One-Year Warranty;
Enamel Layer Thickness: 60-100μm (Flat Workpieces) 80-120μm (Cavity Workpi;
Firing Temperature: 820-900℃ (Optimal Range for Enamel Fusion);
Temperature Control Accuracy: ±2℃;
Temperature Uniformity Within The Furnac: ≤±5℃;
Firing Time: 3-6min (Adjusted Based on Workpiece Thickness);
Power Supply: 440V/380V/50Hz/60Hz Three-Phase AC (Customizable);
Certifications & Warranty: CE ISO9001 SGS;
Pre-Treatment Film Thickness: 4-6μm (Adhesion ≥5n/Cm);
Surface Moisture Content After Drying: ≤0.5%;
Energy Consumption Per Unit Product: ≤6.5 Kw·H / Piece;
Furnace Thermal Efficiency: ≥86% (Includes Waste Heat Recovery);
Categories: Oven Liners /Door Glass Frames/Grill Racks/Outer P;
Materials: Cold-Rolled Carbon Steel / Stainless Steel;
Oil Residue After Degreasing: ≤5 Milligram Per Square Meter;
Total Installed Power: 150-2000kw (Customizable);
|
