| Specification |
After-sales Service: Technical Support;
Warranty: 1 Year;
Tile Type: Colored Steel;
Condition: New;
Customized: Customized;
Usage: Roof, Wall, Floor;
Transmission Method: Electric;
Thickness: 0.4-0.7mm;
Main Motor Power: 4 Kw;
Electrical Control System: Control Box;
Speed: 20-30 Times/Min;
Hydraulic Motor: 3 Kw;
Control System: PLC;
Roller Station: 4;
Power: 380/50Hz/3pH;
|
After-sales Service: on Line/ on Site;
Warranty: 13 Months After B/L;
Tile Type: Colored Steel;
Condition: New;
Customized: Customized;
Usage: Roof, Wall;
Transmission Method: Hydraulic Pressure;
Feeding Width: 914mm;
Effective Width: 700mm;
Material of Cutting Blade: Cr12 MOV;
Material of Roller Shaft: 45# Steel, Galvanized;
Material of Rollers: 45# Steel, Quenched with Hard Chrome;
Type of Cutting: Roll-Formed and Length-Set Cutting;
Proper Span: 4-20m;
Thickness of The Coil: 0.6-1.5mm;
The Depth of The Groove: 123mm;
Using Rate: 76.5%;
|
After-sales Service: on Service;
Warranty: on Service;
Tile Type: Glazed Steel;
Condition: New;
Customized: Customized;
Usage: Roof, Wall;
Transmission Method: Hydraulic Pressure;
Third Party: CE, ISO;
Method: Hydraulic Pressure;
Coil Thickness: 0.3-0.8/0.8-1.5mm;
Main Frame: 350h;
Weight: 6t;
Voltage: 380V 3phase 50Hz;
Material of Cutting: Cr12 Mould Steel with Quenched Treatment;
Package: Container;
Mark: Zhongke;
HS: 8401200000;
Use: Roof, Wall;
Speed: 12m/Min;
D.Shaft: 80mm;
|
After-sales Service: 7*24;
Warranty: 24 Months;
Tile Type: Glazed Steel;
Condition: New;
Customized: Customized;
Usage: Roof, Wall;
Transmission Method: Electric;
Forming Stations: 12;
Main Motor: 7.5+5kw;
Cutting Material: Cr12MOV;
Material Thickness: 0.3-0.8mm;
Material: Pre-Painted Galvanized Steel(PPGI);
Container Type: 40 Gp;
|
After-sales Service: on Line/ on Site;
Warranty: 13 Months After B/L;
Tile Type: Colored Steel;
Condition: New;
Customized: Customized;
Usage: Roof;
Transmission Method: Machinery;
Feeding Width: 1000mm;
Effective Width: 760mm;
Decoiler: 5t Manual Decoiler;
Material of Roller Shaft: 45# Steel, Galvanized;
Material of Rollers: 45# Steel, Quenched with Hard Chrome;
Main Motor Power: 4kw;
Working Rate: 10-15m/Min(Exclude Cutting Time);
Thickness of The Coil: 0.3-0.8mm;
Forming Steps: 18 Steps;
Cutting Type: Automatic Hydraulic Cutting;
Cutting Tolerance: +/- 1.0mm;
Cutting Blade Material: Cr12 HRC58º-60 Heat Treatment;
Hydraulic Power: 3.0 Kw, Pressure: 16MPa;
Control System: Pcl Automatic Control;
|
