| Specification |
Function: Storage, Cleared;
Display: Digital;
Usage: Electric Component Tester, Catalytic Element Tester, Lightning Protection Device Tester;
Warranty: With Warranty;
Power Source: DC 100V-300V;
Weight: 0-10Kg;
Installation: Direct Connected;
Customized: Non-Customized;
Test Parameter: Z , Y , C, L, X, B, R, G, D, Q, θ;
Frequency: 40Hz~100kHz;
Accuracy: 0.1%;
|
After-sales Service: 7*24 Online Service/Change New;
Function: Locating;
Display: Digital;
Usage: Calbe Fault Detector;
Warranty: With Warranty;
Power Source: AC200-240V;
Weight: 〉10Kg;
Installation: Direct Connected;
Customized: Customized;
Output Voltage: 30kv ~ 90kv;
Output Frequency: 0.1Hz, 0.05Hz, 0.02Hz;
High Test Capacity: 5.5μf;
Measuring Length Range: Over-Current Protection.;
Measuring Method: Low-Voltage Pulse Method, Flash Current Method, Mu;
Blind Spots: 0 ~ 5m or No Blind Spots;
Standby Time: Can Be Used Continuously for About 6 Hours;
Control Unit Weight: 7kg;
|
After-sales Service: 1 Year;
Display: Digital;
Weight: 0-10Kg;
Customized: Customized;
Output Voltage: 30kv ~ 90kv;
Output Frequency: 0.1Hz, 0.05Hz, 0.02Hz;
High Test Capacity: 5.5μf;
Measuring Length Range: Over-Current Protection.;
Measuring Method: Low-Voltage Pulse Method, Flash Current Method, Mu;
Blind Spots: 0 ~ 5m or No Blind Spots;
Standby Time: Can Be Used Continuously for About 6 Hours;
Control Unit Weight: 7kg;
|
After-sales Service: After-Service Is Provided;
Display: Digital;
Temperature Range: Rt+10℃~98℃;
Temperature Fluctuation: ±0.3℃;
Temp.Resolution: ±0.1℃;
Heating Time: 45 Minutes;
External Chamber Material: SUS 304 Stainless Steel;
Interior Chamber Material: SUS 304 Stainless Steel;
Insulation Material: Fiberglass Wool;
Heating System: Stainless Steel High Speed Heater;
Control System: Button Type Digital Display Controller;
Safety Device: Phase Sequence Protection, Over Temperature Protec;
Customization: Non-Standard or Special Requ;
|
After-sales Service: 12month Warranty,Lifelong Technical Service;
Function: Inertial Sensors Testing;
Display: Digital;
Usage: Electric Component Tester, Inertial Sensors Testing;
Type: Motion Simulator;
Environment: Room Temperature;
Warranty: With Warranty;
Power Source: AC220-230V;
Weight: 60kg;
Installation: Direct Connected;
Customized: Customized;
Load Capacity: 15kg Max Payload;
Load Table: Φ320mm Super-Hard Aluminum Alloy;
Table Flatness: ≤0.03mm;
Angular Positioning Accuracy: ≤20" (All Axes);
Angular Repeatability: ≤5";
|
