| Specification |
Type: Voice Evacuation Panel;
Function: Networked, 1X Microphone 1X Audio Input 2X Remote Pagings;
Usage: Fire, Voice Alarm System;
Alarm Volume (within 1m): ≥110dB;
Networking Mode: TCP/IP;
Receive Frequency: 433.92MHz;
Wiring Mode: Sub-Line System;
Amplifier Max. Total Power: 500W;
Standby Battery: Two 12V/12ah Lead-Acid Batteries;
Background Music: MP3;
Speaker Outputs: 10-Zone;
Pre-Record Emergency Voices.: SD Card;
Rated Input Voltage: 230VAC(±15%), 50Hz/60Hz;
Color: Grey;
Style: Wall Mounted;
|
Type: Fire Alarm Host;
Function: Networked;
Usage: Auto, Fire, Smoke;
Alarm Volume (within 1m): ≥100dB;
Networking Mode: Dial-up;
Receive Frequency: Wire;
Wiring Mode: Sub-Line System;
Main Supply: 90-270VAC, 50/60 Hz;
Number of System Zones: 4 Zone;
Panel Weight: 5kg;
Extinguishant Release Output: 21V-28VDC. Maximum Load 2 AMP;
Alarm Zone End of Line (Ohms): 10K;
Power Supply Rating: 3 AMPS Total Including Battery Charge 28V+/-2V;
Battery Type: Two 12 Volt Sealed Lead Acid in Series;
Battery Charge Voltage: 27.6VDC Nominal;
Battery Charge Current: 0.7A Maximum;
Maximum Current Draw From Battery: 3AMPS;
Fault Relay Contact Rating: 2A /30VDC Maximum for Each;
Fire Relay Contact Rating: 2A /30VDC Maximum for Each;
First Stage Contact Rating: 2A /30VDC Maximum for Each;
Second Stage Contact Rating: 2A /30VDC Maximum for Each;
Extract Contact Rating: 2A /30VDC Maximum for Each;
|
Type: Fire Alarm Host;
Function: Non-Networked;
Usage: Fire, Smoke, Fire Alram;
Alarm Volume (within 1m): ≥80dB;
Networking Mode: Wired;
Receive Frequency: Non-Polarity 2 Wired;
Wiring Mode: Bus System;
|
Type: Fire Alarm Host;
Function: Networked, RS485 or RS232;
Usage: Fire Alarm Control;
Alarm Volume (within 1m): ≥80dB;
Networking Mode: Can Bus;
Receive Frequency: Addressable Fire Alarm;
Wiring Mode: Non-Polarity 2 Wired;
Applications: Building, Factory, Hotel, Housing;
Capacity: Maximum 508;
Installation: Wall Mounted;
Loops: Maximum 2 Loops;
|
Type: Fire Alarm Host;
Function: Networked, RS485 or RS232;
Usage: Fire Alarm Control;
Alarm Volume (within 1m): ≥80dB;
Networking Mode: Can Bus;
Receive Frequency: Addressable Fire Alarm;
Wiring Mode: Non-Polarity 2 Wired;
Applications: Building, Factory,Hotel, Housing;
Capacity: Maximum 508;
Installation: Wall Mounted;
Loops: Maximum 2 Loops;
|