| Specification |
Application: Picking and Placing, Pick&Place;
Control Mode: Point to Point Control;
Drive Mode: Electric;
Axis No.: 4-Axis;
Arm Reach: 700mm;
Payload: 6kg;
Weight: 45kg;
Repeatability: +/- 0.1mm;
Operating Lifespan: 30000 Hours;
Max. Running Speed: 4m/S;
Hand Guiding: Available;
Condition: New;
After-Sales Service: Online Service;
Warranty: 12 Month;
|
Application: Assembly, Machine Tending, Packaging, Painting, Picking and Placing, Welding;
Control Mode: Continuous Path Control;
Degrees of Freedom: 6-axis;
Drive Mode: Electric;
Payload Capacity: 10 kg;
Reach: 1300mm;
Repeatability: ±0.03mm;
Weigh: 40kg;
Condition: Imported;
Maximum End Linear Speed: Approx 2.5 M/S Approx. 2.5 M/S;
Rated Voltage: DC48V;
Rated Power: (Approx) 250 W;
Max. Linear Speed: 2 M/S;
Gross Weight: Approx. 40 Kg;
Base Mounting Hole: φ150 mm, 4×M6;
Operating Humidity: 10%~90% Non-Condensing;
Storage Temperature: -20℃ ~ 60℃;
Operating Temperature: 0℃ ~ 45℃;
Typical Power Consumption: 120 W;
Material: Aluminum Alloy/ABS Plastic;
|
Application: Assembly, Machine Tending, Packaging, Painting, Picking and Placing, Welding;
Control Mode: Continuous Path Control;
Degrees of Freedom: 6-axis;
Drive Mode: Electric;
Payload Capacity: 10 kg;
Reach: 1300mm;
Repeatability: ±0.03mm;
Weigh: 40kg;
Condition: Imported;
Maximum End Linear Speed: Approx 2.5 M/S Approx. 2.5 M/S;
Rated Voltage: DC48V;
Rated Power: (Approx) 250 W;
Max. Linear Speed: 2 M/S;
Gross Weight: Approx. 40 Kg;
Base Mounting Hole: φ150 mm, 4×M6;
Operating Humidity: 10%~90% Non-Condensing;
Storage Temperature: -20℃ ~ 60℃;
Operating Temperature: 0℃ ~ 45℃;
Typical Power Consumption: 120 W;
Material: Aluminum Alloy/ABS Plastic;
|
Application: Assembly, Machine Tending, Packaging, Painting, Picking and Placing, Welding;
Control Mode: Continuous Path Control;
Degrees of Freedom: 6-axis;
Drive Mode: Electric;
Payload Capacity: 18kg;
Reach Radius: 1070 mm;
Repeatability: ±0.03 mm;
Robot Weight: 35 Kg;
Installation Method: Floor / Wall / Ceiling;
Programming Method: Graphical Programming / Drag Teaching;
Control Interface: PC / Tablet / Mobile Device;
Power Supply: 100 - 240 VAC, 50 - 60 Hz;
Power Consumption: 500 W;
Protection Level: IP54;
Communication Protocol: TCP/IP, Modbus TCP, Modbus RTU, Profinet;
I/O Interfaces: 16 Di / 16 Do / 2 Ai / 2 Ao;
Tool I/O: 2 Di / 2 Do / 2 Ai;
Base Diameter: 188 mm;
Mounting Angle: Any Angle Installation;
Safety System: Collision Detection / Force Feedback;
|
Application: Assembly, Machine Tending;
Control Mode: Continuous Path Control;
Degrees of Freedom: 4-axis;
Drive Mode: Electric;
Payload Capacity: 20 kg;
Voltage Corridor: 110-500 Kv;
Applicable Ground Wire: 50-240 mm²;
Power: 36 V Lithium Battery;
Battery: 10 Ah;
|
