DSP Canbus Kit Xenon HID Fast Shipping

Xenon HID kits
1. Canbus HID xenon kits
2. Ultra slim digital AC canbus ballasts
3. No flash, stable low working current
4. High quality with CE&E8 approveed

We are professional xenon kits manufactures for 5 years and exporting a lot.
We have exclusive slim digital canbus xenon kits, 75W kits and angel eyes.

Why our ballast better than others?
1. The circuit controlled by digital chips.
2. Starting current is only 3.9A-4.4A. Only 3seconds to reach standing current 3. 5A, prolonging bulbs' lifespan.
3. Memory fuctions. For example, it was 2.8A when last changing lights, it would restart from 2.8A, protecting bulbs and original car circuits.
4. Constant power is very stable. Bulbs always work when 8V and lights will not change. It's constant power keep 35W both high and low voltege case.
5. Current will not change even the road is not flat. There is no bad effect. For bulbs and original car circuits

Package content:
1.2 DSP ballast (Model No.: FS01)
2.2 Single lights
3.2 Fixing Pads
4. Screws and Wiring's
5. Users' Manual
6. Color Box

Ultra slim ballast: 8.2 * 5.8 * 1.5 cm. Digital canbus design

Ballast Parameter( Model No.: FS01)

1. Working voltage ranged: 9 to 16V
2. Working current: 3.2A
3. Input voltage: 12V
4. Input current when turn on the light: <5.5A
5. Instantaneous voltage when turn on the light: 23 ± 1kV
6. Output power: 35 ± 0.5W
7. Working temperature range: -40 to +105 degrees Celsius
8. Output load: One HID 35W lamp
9. EMI electromagnetic compatible standard to the ballast: S95, 54 and EC
10. Reverse polarity protection; Short/open-circuit protection
11. Shock, water and dust-resistant protection
12. Size: 9.6 x 5.8 x 1.5cm

Ballast Features
1. Cold light low current, quick start light
2. DSP intelligent start, no impact on light bulb, prolong the life more than three times
3. Intelligent power compensation, stable brightness output
4. Low pressure drop power, safety protection original car circuit
5. Fewer Components, less consumption, high efficiency, low temperature and low failure rate
6. With CAN-BUS design, fully inhibit transmission, radiated interference. Never interfere with the original car appliance
7. Installed directly on any car models, without any auxiliary decoder.

1. Bulb Type:
H1, H3, H7, H8, H9, H10, H11, H13, HB1, HB2, HB3, HB4, HB5
9003, 9004, 9005, 9006, 9007, 9008, 9140, 9145
880, 881, 886, 889, 893, 894, 89, 898, 899 (all 800 series available)
D2S, D2R, D2C-- D2S, D2R, D2C kits require a wiring harness that is sold separately

2. Color temperature: From 4300K, 5000K, 6000K, 8000K, 10000K, 12000K, 15000K to 30000K

Warranty: 18months

The following tests are carried out before delivery.
1) 6 hours continuous working aging test
2) Connection circuit protection test
3) Over voltage protection test
4) Flash light concussion test
5) Quakeproof capability test
6) Cold, warm boot test
7) Polarity protection test
8) Short and circuit protection test
9) EMC anti-jamming test
10) Ballast and bulb matching test

Any need please don't hesitate to contact us, best wishes in advance