Alarm System (BY-905)

The system contains a host machine, wireless infrared surveillance probes and wireless controllers. The alarm host machine is connected with phone line, and wireless infrared surveillance probes need to be installed in the areas that need to be monitored. Control the system on/off by the controller or cell phone/ telephone (when you are not in the house). The siren of the system will alarm, while someone comes into the protected area, at the same time the system dials the pre-fixed alarm telephone number automatically. Even if the host is not in the house, he can know the condition of the house and adopt relative measures in time. The most advantage of the system is that it can be controlled by remote cell phone or telephone. The system is suitable for normal family, offices and so on. The system can extent to be smoke alarm, gas alarm and door magnetic alarm and so on.

Installation
1, As the picture, insert the telephone line to the external line port of the host machine.
2, Connect telephone and host machine with the additional line. When pick up the headphone, you can hear the normal dialing sound, if not, please check the connection lines.
3, Insert the power line to the host machine power port, the instruction light on the machine will flash once and a notice sound can be heard, which means the machine starts working normally.
4, Detectors: Install the infrared detector and other detectors to the proper places. Infrared detector should be placed 2.1meters higher than ground, with 70 degrees incline.

Functions and features
1, Set and withdraw defense by mobile phone (telephone) and remote controller.
2, IP dial function
3, Emergence call function
4, High-decibel alarm siren
5, Wireless infrared detector stakeout
6, Multi-protection areas
7, Extent to be smoke alarm, gas alarm and door magnetic alarm and so on.
8, Power cut protection, the machine can be supported by four AA batteries