Board Making Machine

Economy Wall Panel Production Line / Hollow Concrete Wall Panels / Gypsum Board Machine

Gypsum wall panel production line data The products produced on the production line-gypsum hollow wall panels Gypsum hollow wall panels are made primarily from building gypsum, with optional additives or functional admixtures. The mixture is stirred with water to form a slurry, which is then cast, de-molded, and dried through various processes. To enhance the bending strength, fiberglass mesh is added to both sides of the panel during the forming process. These panels are used for non-load-bearing interior partition walls in buildings. 01.Environmental protection and waste utilization Gypsum lightweight partition boards are made from industrial waste materials such as phosphogypsum and fly ash, without using clay or harmful substances to the human body, and they are non-radioactive, meeting the national requirements for environmentally friendly materials. 02.Excellent fire resistance Due to the release of chemically combined water when gypsum is heated, its fire resistance limit can exceed 2 hours, and it does not emit toxic gases, with its non-combustibility meeting national Class A standards. 03.Low bulk density Lightweight gypsum boards have only one-third the density of clay bricks and half that of hollow bricks, significantly reducing the structural load of buildings, decreasing foundation costs, and making transportation and construction easier, which lowers the total construction cost. They also enhance the earthquake resistance of buildings. 04.The wall has good earthquake resistance. As it is an assembled construction, it features a three-in-one structure where panels connect to form a cohesive unit, providing strong impact resistance. It uses steel structure anchoring methods, resulting in high wall strength and low elastic modulus, which quickly absorbs impact energy, making it highly earthquake-resistant. 05.Excellent sound insulationperformanc performance Gypsum boards are excellent building materials that provide both sound insulation and sound absorption, effectively blocking noise levels of 36 to 42 dB. Their sound insulation performance meets the national standards for residential sound insulation. 06.Lightweight insulation Under identical conditions, gypsum lightweight partition boards weigh only 1/3 to 1/4 of brick walls. Additionally, due to the porous structure of gypsum boards, their thermal conductivity is 0.30 W/(m·K), which is superior to that of bricks at 0.43 W/(m·K) and concrete at 1.63 W/(m·K), providing excellent insulation performance. Serial Number Project Indicators Plate thickness 100mm Plate thickness 200mm 1 Impact resistance/Next ≥5 ≥5 2 Bending failure load/multiplier of slab self-weight ≥1.5 ≥1.5 3 Compressive strength/MPa ≥3.5 ≥3.5 4 Softening coefficient ≥0.4 ≥0.4 5 Mass per unit area, kg/m² ≤80 ≤80 6 Moisture content ≤1 ≤1 7 Moisture content/% ≤0.4 ≤0.4 8 Suspension force/h ≥1000 ≥1000 9 Airborne sound insulation ≥40 ≥48 10 Fire resistance limit/h ≥3 ≥3.5 Project Plate thickness(mm) 90 120 150 Impact resistance(Next) ≥5 ≥5 ≥5 Single-point suspension force(N) ≥1000 ≥1000 ≥1000 Bending failure load(Weight multiplier of the board) ≥1.5 ≥1.5 ≥1 Moisture shrinkage value(mm/m) ≤0.6 ≤0.6 ≤0.6 surface density(kg/m²) ≤90 ≤110 ≤160 Airborne sound insulation(dB) ≥35 ≥40 ≥50 Fire resistance limit(h) ≥1 ≥1 ≥1 Compressive strength(MPa) ≥3.5 ≥3.5 ≥5 Thermal conductivity{w(m².K) ---- ≤2.0 ≤2.0 Softening coefficient ≥0.8 ≥0.8 ≥0.8 Moisture content(%) ≤12/10/8 Annotation:Softening coef

Multiple Size Hot-Dipped Galvanized Coating HDG Strut Slotted Channel Roll Forming Machine

Low Price Automatic PVC Laminated Gypsum Board Production Line Price

Gypsum Drywall Board Making Production Gypsum Board Manufacturing/Processing Natural Hot Air Automatic Paper Surface Machine

Advanced Technology Gypsum Board Production Line with High-Quality Paper

Fully Automatic Lightweight Eco-Friendly Gypsum Board Production Line for Educational Institution Remodeling